Fence & Deck Stain & Seal Prep in Denver & the Colorado Front Range
Starting at $225 · Licensed & Insured · 5-Star Rated
Colorado weather beats up exterior wood fast. UV rays break down stain, moisture drives mold into grain, and winters leave surfaces dark and slick. Our fence and deck stain & seal prep service strips failing stain, removes grime and organics, and gets wood ready for fresh protection.
Recent strip-and-restore results
These are the exact before/after photos from recent projects: one deck and one fence restoration.
We strip and prep wood the right way before staining
Stripping and prepping wood for stain requires controlled pressure, the right chemistry, and patience. We remove failing stain, embedded grime, and organic buildup without gouging soft grain. Then we neutralize and rinse so the surface is ready for proper stain absorption and adhesion.
What this service includes
- Wood decks (pressure-treated, cedar, redwood, ipe, mahogany)
- Composite decks (Trex, TimberTech, Azek, Fiberon)
- Deck stain stripping and neutralization
- Fence stain stripping and detail rinsing
- Low-pressure wash to remove mildew, algae, and gray oxidation
- Surface prep for new stain or clear seal
- Prep cleaning for railings, spindles, and gates
- Before/after walkthrough so you can see the restoration results
Why homeowners book this service
If you're planning to re-stain your wood deck, we're the prerequisite step. Stain won't bond properly to a dirty deck — the old gray surface layer blocks penetration. After our cleaning, let the wood dry for 48-72 hours, then stain. We offer the prep service itself and can coordinate timing so your staining step goes on clean, dry, properly prepared wood.
Our process
- Inspect deck for loose boards, protruding nails, and rot (we'll flag it, not fix it)
- Pre-wet surrounding plants and tarp sensitive areas
- Apply appropriate wood or composite cleaner
- Dwell time 10-15 minutes, agitate if needed
- Rinse with appropriate pressure for surface type
- Detail-rinse railings, posts, and fence pickets for a complete prep finish
- Final walkthrough
Typical pricing
Deck/fence prep pricing depends on size, stain condition, and how many stripping passes are needed. Most projects start at $225, with full strip-and-prep packages commonly ranging $400-$1,200. We provide exact pricing after a quick walkthrough or photos.
Frequently Asked Questions
Will pressure washing damage my wood deck?
High-pressure would — which is why we use low-pressure soft-wash techniques on wood. Done correctly, the wood comes out cleaner without any surface fuzzing or grain damage.
Can you clean and re-stain in one visit?
No. Wood needs 48-72 hours to fully dry before staining. We recommend booking your stain contractor 3-5 days after our cleaning. Rushing stain onto damp wood causes peeling within a year.
What about mold between deck boards?
Our cleaner penetrates into the joints and kills mold at the root, not just surface. For heavy mold cases we apply a second treatment.
Can you clean under the deck?
We can clean visible areas but tight crawl spaces under low decks are usually skipped — not enough room to maneuver equipment and it's not a high-value area.
Ready for Your Free Quote?
Tell us about your project and we'll get back within 24 hours with an honest, transparent estimate — no sales pressure, no hidden fees.
- ✓ Free, no-obligation estimate
- ✓ Licensed & insured, $1M general liability
- ✓ 5-star rated across the Front Range
- ✓ Satisfaction guaranteed
Prefer to call?
(720) 988-4540